Brief Description Of The Structure and Advantages of The Tile Press

1.A basic principle of the cold bending forming process of the Tile Press is: the strip is bent in a straight line along the longitudinal direction. However, the combination of the pressure generated during the bending deformation and the residual stress in the strip often makes the strip deviate from the cold bending equipment.

2. To describe the degree of deviation of the strip from a forming roll, the more commonly used words are: side bending—bending in the horizontal direction, warping—bending in the vertical direction, twisting—helix.

3. In order to solve this problem, a straightening mechanism should be used at the end of the cold roll forming machine. How does the tile press solve the problem of floor space. For example, 840-900 double-layer color steel tile forming machine, many customers need to choose a cold roll forming machine with a small footprint due to the small workshop area.

4. And the double-layer cold roll forming machine can change the production model at any time without any adjustment of tools and equipment, but only one type of profile can be produced at the same time.

5. The single-layer Tile Machine seems to be only the disadvantage of only the size of the floor area. During use, two profiles can be formed at the same time.

6. In order to adapt to the profile, the double-layer cold roll forming machine discharges in two layers. The cutting die is also a two-layer height, and a height-adjustable discharge platform is required to receive the upper and lower profiles.

7. The Double-Layer Tile Press equipment adopts a new double-layer design to combine two types of equipment into one machine. One machine has multiple uses, small floor space, convenient transportation and cost saving. Moreover, the equipment cost of double-layer tile press is much lower than two single-layer tile presses, which is the main choice of users.

The tile press adopts high-level automatic control software to realize production information management. The entire unit automation control system uses a highly integrated network to make the automation system more superior. The tile press also has operation and maintenance. The color steel tile press equipment uses high-level automatic control software to realize production information management and the entire unit is automatically controlled. The system adopts a highly integrated network, which makes the performance of the automation system superior. The tile press also has the advantages of operation, maintenance, maintenance, mechanical debugging, and easy mold replacement.

The tile press industry also has dangerous operating strokes during the production process, and everyone should pay attention to installing the chain boxes accordingly. Correspondingly, there should be no place where the chain is leaked from the outside, and people should not be too close to the discharge port of the tile press when the tile press is running to avoid unnecessary damage. The tiles produced by the tile press are also easy to be injured, so corresponding Pay attention to the width and thickness of the tile. The place where the tile press is less conducive for people to approach during the production process is the shear head, so we hope that everyone should pay attention to their own stability when using the tile press.

Before use, check whether all connections, bolts and nuts are installed and there is enough hydraulic oil in the hydraulic pump station. Whether the electrical box wiring is connected to all parts of the machine. After the power trial runs, first run the car empty and carefully observe whether the hydraulic pump has or does not have vibration, noise, or oil, and whether the moving parts are coordinated. Before the equipment is used, the mold is adjusted to the ceiling and everything is normal, and then start the operation.