vertical plastic injection molding machine DVC-850DS
Clamping force : 45Ton-120Ton
·Injection weight : 97-415g
·Vertical clamping and horizontal injection design
·Rigid C-frame Tie-bar less design,suitable for over molding or insert molding process and multi-purpose injection molding process
Specification | |||||
Model | Unit | DC-850DS | |||
( Injection Unit ) | Screw diameter | mm | Ф36 | Ф40 | Ф45 |
Maximum injection pressure | Kg/cm2 | 1620 | 1313 | 1037 | |
Theoretical shot volume | cm3 | 163 | 201 | 254 | |
Maximum shot weight | g/Oz | 150(5.3) | 186（6.6） | 235（8.3） | |
Injection rate | cm3/sec | 103 | 128 | 161 | |
( Clamping Unit ) | Clamping force | ton | 85 | ||
Minimum mold thickness | mm | 200（Can be customized according to customer requirements） | |||
Opening stroke | mm | 270 | |||
Open daylight | mm | 470（As required） | |||
Nozzle Center Height | mm | 170±20 | |||
Nozzle Center Distance | mm | 95 | |||
Ejector force | T | 1.1（Can be customized according to customer requirements） | |||
Ejector stroke | mm | 88 | |||
( Others ) | Sliding Table Size | mm | 1100 × 390 | ||
Sliding Table Stroke | mm | 570 | |||
Pump motor power | Kw | 11 | |||
Hydraulic system pressure | Kg/cm2 | 140 | |||
Barrel heating power | Kw | 7.45 | |||
Total wattage | Kw | 18.45 | |||
Oiltank capacity | L | 310 | |||
Machine weight (approx.) | T | 5.6 | |||
Machine dimensions(approx.) | m | 3.0×1.9× 2.8 | |||
Specification of vertical plastic injection molding machine | ||||
Model | Unit | DC-1200DS | ||
( Injection Unit ) | Screw diameter | mm | Ф46 | Ф52 |
Maximum injection pressure | Kg/cm2 | 2193 | 1716 | |
Theoretical shot volume | cm3 | 365 | 467 | |
Maximum shot weight | g/Oz | 325（11.4） | 415（14.6） | |
Injection rate | cm3/sec | 123 | 157 | |
( Clamping Unit ) | Clamping force | ton | 120 | |
Minimum mold thickness | mm | 250（Can be customized according to customer requirements） | ||
Opening stroke | mm | 300 | ||
Open daylight | mm | 550（As required） | ||
Nozzle Center Height | mm | 200±20 | ||
Nozzle Center Distance | mm | 95 | ||
Ejector force | T | 4.6（Can be customized according to customer requirements） | ||
Ejector stroke | mm | 88 | ||
( Others ) | Sliding Table Size | mm | 1250x495 | |
Sliding Table Stroke | mm | 650 | ||
Pump motor power | Kw | 10.4 | ||
Hydraulic system pressure | Kg/cm2 | 25.4 | ||
Barrel heating power | Kw | 480 | ||
Total wattage | Kw | 4.6 | ||
Oiltank capacity | L | 90 | ||
Machine weight (approx.) | T | 11.6 | ||
|
Previous: Family Workshop Flour Milling Plant Next: Explosion proof Solenoid Valve Copyright：@2020-2021 | ||||
Comments Please sign in or sign up to post.
0
0 of 500 characters used