The Methods To Use Smart Steel Bending Center

Here is a Precision Machining Stirrup Bender Factory talking about how to use smart steel bending center.

If you need any information about Convenient Stirrup Bending Machine, feel free to contact us.

Convenient Stirrup Bending Machine

How to use CNC bending center？

1. Check whether the performance is good before using the equipment, and whether the workbench and the CNC bending center are kept level.

2. Before work, prepare each mandrel tool block and adjust the mandrel forming shaft and armrest shaft according to the regulations.

3. Check if the stoppers and turntables of the mandrel are damaged. If there is any problem, handle it in time.

4. Before processing, the bending center of the CNC steel bar should be idling for a few minutes before inserting the bent end of the steel bar into the gap provided by the turntable.

5. The other end of the steel bar needs to be pressed by hand, and the fuselage is fixed, so that the side that blocks the steel bar can be started.

6. When processing steel bars in the bending center of CNC steel bars, it is forbidden to change the diameter, number of roots, speed, etc. of the steel bars.

Through the above-mentioned knowledge about the use of CNC bending bar bending center, there are other CNC bending center doubts can contact us, you can continue to pay attention to our website.

If you want to learn more the information about Easy Operate Stirrup Bending Machine, welcome to follow our website.