How to remove protective film from glass

Nowadays, in many places, in order to protect the glass and also for the appearance, a layer of protective film is often attached to the glass, but how to remove the protective film for glasses, here are several methods for you.

chemical removal

It can be removed with special cleaning fluids, such as asphalt cleaners. If you don't have these cleaners, you can also soak them with soapy water or washing powder water, which can also achieve complete removal. Also use a towel dipped in a small amount of alcohol to repeatedly wipe the plastic mucosa. It can also be scratched with various bank cards, membership cards, and phone cards.

physical removal

The first one: it is not a long-lasting plastic mucous membrane, you can wrap a hot towel in a plastic bag and apply it for a while, and some plastic mucous membranes can be easily torn off.

The second: is to use a hair dryer. Heat it back and forth with hot air around the plastic film, and after a while, it can be easily peeled off.

The third method: hard plastic sheet method: (such as the recharge card, game card, membership card, etc. we use) The method is similar to the blade method, because the hardness of the plastic sheet is small, and the damage to the glass when scraping the sticker is relatively small.

Trace cleaning method:

1. Use the eraser to wipe inward along the edge little by little to remove the marks easily. But depending on how sticky you are, the time may be different. If you have the conditions, alcohol + eraser works very well.

2. You can take a dry cloth soaked with vinegar to cover the entire trace, and when it is completely soaked, you can easily remove it with a ruler.

3. You can also use heating to soften the traces: blow it with a hair dryer to soften the adhesive. When the adhesion of the traces becomes weak, you can easily remove the protective film stuck on the glass. If there is still a small trace, wipe it with a polish remover that removes nail polish.

4. Add a little ammonia water and turpentine mixture with soap to remove a lot of dirt and make the glass surface more shiny (this article applies to tiles, ceramics, glass, etc.).

5. Repeatedly sticking and tearing with good viscous transparent glue, you can remove some of the surface

6. Wipe it off with a bit of letter sodium water, or you can use paint thinner.

7. Wipe with a cotton swab dipped in nail polish remover.

8. Wipe with essential oil.

9. Wipe with special detergent or sports shoe decontamination cream.

10. Pour some banana water (available at hardware stores and paint stores) and wipe it on a cloth to remove the traces of plastic sticking.