A Basic Overview about Circular Saw Blade

A circular saw is a hand-held or benchtop tool used to cut many types of materials, such as wood, plastic, metal, and masonry. All circular saws have a disc or blade with teeth at the edge. The motor on the saw rotates the blade at high speed, allowing the saw to cut the material smoothly.

There are several different factors in choosing a circular saw. First of all, what is it used for? As with any purchase, we get what we pay for. Therefore, to ensure that the tool will last more than 20 years, it is important to choose a tool with a strong motor. A powerful motor will ensure the top speed of the blade when cutting a variety of hard and soft materials.

Because tools are standard purchases for households, costs are generally known and standardized. If you don't know that amperage and horsepower are a factor in your decision, then cost can also be a reliable indicator. For a few hundred dollars, people should be confident that their tools will last a long time.

Now that you have the saw installed, the fun part is deciding which blade to use for that particular job. Choosing the right saw blade for the job can not only make the tool better, cleaner, but also safer.

Saw blade type.

Generally, there are four main categories of circular saw blades. They are. Split saw blades, crosscut saw blades, combination saw blades and specialty saw blades.

The cracking saw blade is designed to achieve a smooth, clean and safe cut when tearing the wood or cutting in the same direction as the grain. Rip saw blades have a limited number of large, straight serrations, which allow dust from cutting to be effectively thrown off and removed.

Combination saw blades are designed to cut both cracks and crosscuts and are the most common type of circular saw blade. Unless you have two circular saw blades at any one time, switching from a rip blade to a crosscut blade every time you change the direction of the cut is too much trouble. Therefore, the combination blade allows one to cut in both directions. Modular blades have various numbers of teeth. The difference between a higher and lower tooth count is the finish. The more teeth, the smoother the cut.

Crosscut saw blades are designed to achieve a smooth, clean and safe cut perpendicular to the grain of wood. The crosscutting saw blade is cut with sawtooth; The serrations alternate from left and right.

Specialty blades include various blades such as Dado and plywood, which should get the attention it deserves in another article.

Saw blade size.

Circular saws are not uniform in size. Blade sizes vary depending on manufacturer, intended use, and motor size. When replacing or ordering additional blades, it is important to refer to the manufacturer's specifications to determine the correct size.

Security.

Circular saws, like other power tools, can cause serious injury if not handled properly. Before using any tool, it is important to carefully read the manufacturer's user manual to familiarize yourself with the tool, its functions and features. Always be sure to protect yourself properly by wearing eye and ear protection, and always adjust your tools when unplugged.

The above is the introduction of circular saw blades, if you are looking for saw blade suppliers, please contact us. Hebei JK tools Co., Ltd. is a high-tech enterprise with strong economic strength and technology research and development ability. It is located in the north of Dongbaitang Village, Zhengding County, Shijiazhuang City, Hebei Province. The company covers an area of more than 3000 square meters, introduced a large number of automatic and semi-automatic production equipment, so far has more than 50 employees.

The company has passed the ISO9001 quality system certification and hebei province safety production level 3 standard, and was rated as hebei Province science and technology smes.

We maintain long-term cooperation with Yanshan University, Henan University of Technology and Shijiazhuang Vocational and Technical College. These universities provide us with a strong technical force and skilled workers, so that we can maintain a greater advantage in technology. We are a well-equipped and skilled professional company.

Our products include diamond saw blades, diamond segments, turbo saw blade, polishing pads, cup wheels, core bits, PCD saw blades, etc. Our products have been exported to more than 35 countries and regions, such as Brazil, India, Pakistan, Thailand, Vietnam, Malaysia, Singapore, Indonesia, Turkey, Egypt, South Africa, Italy, Poland, Russia, etc. Jk Tools also has sales offices in Shanghai, Guangzhou, Linyi and Beijing for the domestic market.

Let's start our relationship and go hand in hand for our brilliant life.