FFP3 Laianzhi Brand White List Fish Shape Mask Headband No Valve 4 Layers Melt-Blown Face Mask

FFP3 Laianzhi Brand White List Fish Shape Mask Headband No Valve 4 Layers Melt-Blown Face Mask

FFP3 willow leaf shape protective mask complies with World Health Organization (WHO) guidelines. You can use them during SARS, bird flu, and coronavirus outbreaks. The ffp3 willow mask also protects against fine dust and smoke.

High-efficiency Filter Material

Filtration efficiency >99%, Low breathing resistance

Large dust holding capacity

Fits closely to the face

Effectively prevent polluted air from entering from the edge gap comfortable to wear

HOW TO WEAR THE MASK

Instructions:

1. Open mask facing the side without the nose clip, place the nose clip on the top of the mask.

2. Hold the mask in place on the face with your hands and place the lower edge of the mask against your chin,Pull the lower headband over your head and place it behaind your neck and under your ears.

3. Pull the upper headband over your head and place it on top of your head.

4. Adjust the position of the mask so that the mask is in the middle of the face, and the edge is close to the face.

5. Place the fingers of both hands in the middle fo the nose clip and press inward while moving the fingertips along the clip to the sides until the clip is fully pressed into the shape of the bridge of the nose. Sequeezing the mask nose clip with only one hand may interfere with the fit of the mask.

6. Before entering the work area, the user must check the tightness of the mask with the face.

Inspection Method:

A. Cover the mask with both hands and breathe vigorously. If air overflows from the nose clip, follow step 5 Newly adjust the nose clip. If air overflows from the edge of the mask, adjust the headband. If still can't get good tightness, steps 1-6 should be repeated until a good tightness is obtained.

B. If you do not feel the air overflow, you can enter the work area.

How to choose the right FFP3 willow leaf shape protective mask?

First: the mask dust efficiency to be high. General gauze mask, its dust resistance principle is mechanical filtration. That is, when the dust collides with the gauze, after a layer of barriers, some large particles of dust are blocked in the gauze. However, fine dust, especially dust less than 5 μm, can pass through the mesh of the gauze and enter the respiratory system. The filter material of our mask is composed of fibers filled with permanent static electricity, which can really prevent dust.

The second: the close degree of mask and face shape is good. When the mask is not close to the face, airborne dust can enter the respiratory tract through gaps around the mask. Therefore, people should choose a mask that fits their face shape and wear it correctly.

Third: Wear comfortable. The respiratory resistance should be small, the weight should be light, and the wearer should be hygienic and easy to maintain, such as a willow leaf shape protective mask.

Wholesale the best FFP3 protective mask

As a professional ffp3 willow leaf shape protective mask manufacturer, Saifute will provide you with the best quality products and the most comfortable service. We have a 100,000-grade dust-free purification workshop, which is sterilized by ethylene oxide. We use strict production standards to provide you with real trust quality. If you are interested in our products, please contact us as soon as possible!