Galvanized 'Y' Pickets and Razor Wire Security System for Saudi Arabia

Y Fence Post and Razor Wire Security Fencing System for Saudi Arabia

Engineering Drawings

This fence system features "Y" shaped pickets as the primary support structure. Each picket is crafted from a single galvanized steel piece, bent to form two arms at an outward angle.

• Picket Dimensions: 60 x 60 mm (square cross-section)

• Picket Length: 2.5 meters

• Picket Thickness: 2.35 mm

• Y Arm Dimensions: 60 x 60 mm

• Y Arm Thickness: 2 mm

• Arm Length: 50 cm

• Hot Coating: Approximately 400 g/m² (galvanized)

• Hooks: 3 hooks per arm for attaching barbed wire

• Cap: 2 UV-resistant galvanized steel caps per "Y" arm

• Hole Diameter: 7 mm (6 holes per picket)

Features

• Increased Strength: The "Y" shape provides enhanced stability compared to traditional posts.

• Razor Wire Attachment: Six welded hooks (three on each arm) securely hold razor wire coils.

• Mesh Integration: Razor wire coils are attached to the hooks, forming a highly effective barrier with sharp edges.

• Durability: Galvanized steel ensures corrosion resistance and longevity.

Razor Wire Specifications

• Coil Diameter: Approximately 250 cm

• Wire Thickness: 2.35 mm

• Hook Spacing: 7.5 cm
  

The razor wire is attached to a supporting structure, likely a metal grid or frame. The angle between the wire and the support structure is indicated as 270 degrees, suggesting a near-vertical orientation of the razor wire.

• Material: Hot-dip galvanized steel wire or stainless steel (AISI304 & 430).

• Diameter: 2.5 +/- 0.1 mm

• Tensile Strength: 160 kg/mm²

• Zinc Coating: ~200 g/m²

• Shape: The wire is wound into a spiral with sharp barbs extending outward.

The razor wire consists of a length of steel wire with multiple barbs extending outward at regular intervals.
Dimensions:

• The overall width of the wire section is 35-42 mm.

• The distance between the barbs is 22-27 mm.

• The height of the barbs is 15-17 mm.

• Material: The wire is made of stainless steel sheet with the standard AISI304A430.

• Coating: The wire is hot-dip galvanized with a coating weight of 200 grams per square meter.

• Strength: The steel wire has a thickness of 2.5 mm and an extension resistance of 160 kg per square meter.

Dimensions:

• Galvanized Clamps with 8mm Screws: These are indicated with an arrow and a note stating they are needed in 6 units for each picket.

• Pickets: These are the vertical elements of the structure. Their dimensions are not explicitly given.

• Steel Plate: A steel plate is shown with dimensions of 60x60mm, length of 250cm, and thickness of 2.35mm.

• Other Dimensions: Various dimensions are labeled on the drawing, such as 0.60, 0.16, 22-27mm, and 2.5mm.

• Screw used for connecting panel and picket

• 8mm Screw: 6unit for each Picket

• Galvanized Clamps: 6 unit per Picket