Breathable Film Water Remover

Breathable Film Water Remover

Our breathable film water remover masterbatch is a specially formulated additive designed to eliminate residual moisture during the production of breathable membranes. In breathable film extrusion or lamination processes, even trace amounts of moisture can lead to surface bubbles, pinholes, and reduced film quality. This may result in processing failure or inconsistent product performance.

Product Description

As a high-performance solution, this breathable film water remover masterbatch enables direct processing without pre-drying, improving efficiency, reducing energy costs, and maintaining the mechanical properties and breathability of the film.

Product Introduction

During the manufacturing of breathable membranes, moisture is a common but critical issue. Our Breathable Film Water Remover—also referred to as a breathable film desiccant masterbatch—absorbs excess moisture and prevents surface defects such as streaks and air pockets.

This masterbatch is part of our specialized Breathable Film Defoaming Masterbatch series, which combines moisture absorption with anti-foam performance for optimal results. The material has been optimized for:

Moisture uptake balance

Compatibility with film processing temperature

PH neutrality for sensitive film layers

As a reliable moisture remover masterbatch, it is widely applicable to hygiene films, packaging films, and breathable medical applications.

For broader plastic moisture control, check out our Plastic Desiccant Masterbatch.

Application Field

This breathable film water remover masterbatch is primarily used in:

PE-based breathable membrane extrusion

Hygiene and medical film production

Breathable film lamination and coating

Film casting for packaging and barrier layers

It integrates seamlessly with standard PE carriers and supports both mono and multi-layer film systems.

Performance Indicators

Product Features

Absorbs water content up to 20% of its own weight.

Eliminates moisture-related defects like pinholes and bubbles.

Simplifies processing—no drying or additional equipment required.

Functions as both water remover masterbatch and anti-foam agent.

Certified safe for production environments (SGS compliant).

Enhances product stability across production runs.

To explore where this product can be applied, visit our Applications Page.

Method of Use

· Confirm inner packing in good condition before use, if broken, then not use
· Simple mixing with plastic raw material Generally add 0.5%~2%
· After inner packing opened, please run out within 48 hours
· No heating or drying with reworked material

Need a tailored solution or have technical questions? Contact Us for expert advice and custom support.

For more information, please visit our website.