The Purpose Of Neoprene Using With Other RubberⅠ

Butadiene and small amount of isoprene produced by butyl rubber and other vulcanized rubber mismiscibility are very poor, most only with ethylene polypropylene, high-pressure polyethylene and use; So in the specific production and manufacture of neoprene can be with what vulcanized rubber and use, and what purpose? Anti-slip Rubber Sheet factory shares with you.

Neoprene is a single polymer of neoprene. It is an optically vulcanized rubber close to the saturated state and unsaturated fat. The vulcanized rubber after vulcanization has relatively good active oxygen resistance (better than NR, SBR, NBR, EPDM, poor IIR), aging resistance, chemical corrosion resistance, and aging resistance. In addition, it also has good physical properties, flame retardancy, and excellent abrasion resistance, ultra-low temperature ductility, good distortion resistance, and dichlorodifluoride resistance. Refrigerants such as methane gas and ammonia, resistant to dilute acid, resistant to silicone grease, but not resistant to phosphate ester gear oil. It is the easiest to crystallize at ultra-low temperature, hard bottom, poor storage reliability, and in mineral oil with low aniline point The surge is large.
1. Chloroprene rubber is combined with natural rubber and styrene-butadiene rubber
Poor interviscosity and low adhesive force of butyl rubber, and vulcanized rubber or other raw materials must rely on the adhesive agent, the adhesive layer, chloro-butyl rubber 1JLYY1118-SXC although in the viscosity of improvement but with other vulcanized rubber there is a certain difference. Natural rubber with good ductility and high super strength, easy to bond with other raw materials; Styrene butadiene rubber process performance and good adhesion, especially in the emulsion polystyrene butadiene rubber; As a result, chloro-butyl butyl rubber and natural rubber, styrene-butadiene rubber and can greatly improve the adhesion of plastic particles.
Our company sells Nitrile rubber sheet.