INTEGRATED REBAR SHEAR & BENDING LINE
Easy operation Integrated Rebar Cutting
Model KQW50X Shearing part Max Shear Foree (KN) 1750 Co
Model | KQW50X | ||||||||||||||||||||
Shearing part | |||||||||||||||||||||
Max Shear Foree (KN) | 1750 | ||||||||||||||||||||
Conveying Speed(m/min) | ≤60 | ||||||||||||||||||||
Max Steel Strength (MPa) | 570 | ||||||||||||||||||||
Cutting Langth (mm) | Manual | 800-12,000 mm | |||||||||||||||||||
Automatic | 1500-12,000 mm | ||||||||||||||||||||
Culling Capacity | (φ)(mm) | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 25 | 28 | 32 | 36 | 40 | ||||||||
No.(235Mpa) | 17 | 14 | 12 | 11 | 9 | 8 | 8 | 5 | 5 | 4 | 2 | 2 | |||||||||
No.(400Mpa) | 15 | 12 | 11 | 9 | 8 | 7 | 7 | 5 | 4 | 3 | 2 | 2 | |||||||||
Average Pewer Consumption (KW/h) | 9 | ||||||||||||||||||||
Shearing Machine size (mm) | 25000*3500*2000 | ||||||||||||||||||||
Bending part | |||||||||||||||||||||
Conveying speed | 40 (m/min) | ||||||||||||||||||||
Bending speed | 6-8r/min | ||||||||||||||||||||
Benders no° | 2 | ||||||||||||||||||||
Mobile bender move method | Automatic | ||||||||||||||||||||
Power consumption | 10 (kwh) | ||||||||||||||||||||
Min. bending side length | 1200 (mm) | ||||||||||||||||||||
Accuracy ol bending angle | ±1° | ||||||||||||||||||||
Conveyor load capacity | 1000 (KG) | ||||||||||||||||||||
Power supply voltage | 380V/50Hz/3phase | ||||||||||||||||||||
TotaL power | 30 (kw) | ||||||||||||||||||||
Total weight | 8.8 (M.T.) | ||||||||||||||||||||
Bars diameter | 10 | 12 | 14 | 16 | 20 | 25 | 28 | 32 | 40 | 50 | |||||||||||
Bending bars no° | 7 | 6 | 5 | 5 | 4 | 3 | 3 | 2 | 1 | 1 | |||||||||||
STRUCTURE & CHARACTERS
1.BAR STORAGE TABLE
Suitable for maximum steel bar length 12m.
Maximum carrying capacity 1,500Kg.
2. FEEDING TRACK
12-m long feeding tracks consisting of motorized rollers
Length could be specially designed
3. CUTTING MACHINE
Pneumatic-mechanical cutting head.
175 tons cutting capacity.
Width of cutting blade: 300mm.
Cutting frequency: 22 times/min.
4.MEASURING AND TRANSFER TRACK
12-m gauging and transfer tracks consisting of motorized rollers
Servo motor drived length measuring system.
3 measuring system to maximize the gauging speed.
5.COLLECT POCKETS
3 storage pockets at each side.
Pneumatically operated, automatic stack.
6. CONNECTING RACKu
Connect the rebar shear line to bender
7.Horizontal bending center
1 mobile bender
1 fixed bender
Servo motor driven
Pneumatically operated lifting device, delivery straight bars to bending mandrel and transfer shaped bars to storage rack.
Pneumatically operated clamp device will fix the steel bars while bending.
Shaped bars storage rack.
8. ELECTRIC CABINET AND CONTROL CONSOLE
Touchable screen display.
Optimized software, less scrap.
Trouble shooting program to detect any failure or problem.
Previous: Sheet fed label cutter
Next: QLB-5000 Asphalt Plant
Copyright：@2020-2021
Comments Please sign in or sign up to post.
0
0 of 500 characters used