Galvanized Steel Flat Wire for Construction, and Reinforcement Mesh Fencing

Galvanized Steel Flat Wire is a durable industrial material available in low- and high-carbon grades (Q195, Q235, SAE1006). Cold-rolled with zinc coating for corrosion resistance, widths range 2-16.5mm and thickness 0.2-5.5 mm. High tensile strength and flexibility suit applications including wall ties, reinforcement, springs, clips, staples, wiper blades, structural components, fencing, and vineyard supports.

Galvanized Flat Steel Wire - 2 mm x 0.2 mm x 380 mm Length

High-tensile galvanized flat steel wire, 2 mm x 0.2 mm x 380 mm for industrial binding, wire mesh, and manufacturing.

• Wire Thickness: 2 mm

• Wire Width: 0.2 mm

• Standard Length: 380 mm

• Material Type: High-tensile galvanized steel

• Tensile Strength: 1700-1900 N/mm2

• Surface Coating: Hot-dip galvanized finish for corrosion resistance

• Typical Applications: Used in binding, fastening, industrial manufacturing, and wire mesh reinforcement

• Packaging Options: Bulk coils, pre-cut bundles, or customised lengths

• Quality Standards: Compliant with international steel wire and galvanization standards

• Storage Recommendations: Keep in dry conditions to prevent oxidation before use

• Shipping & Delivery: Available for domestic and international shipments with protective packaging

Galvanized Steel 9T1 Flat Wire - 8 x 1.5 mm UNE 36089 Standard

Galvanized Steel Flat Wire 8x1.5 mm UNE 36089 Standard for Rural Fencing and Construction

• Flat wire thickness: 1.5 mm

• Wire width: 8 mm

• Available Lengths: 500 m and 1000 m coils

• Impact Load Capacity: 700 kgf (equivalent to 70 gsm)

• Zinc Plating: Light zinc layer coating for basic corrosion protection

• Carbon ≤ 0.12%

• Manganese: 0.35-0.60%

• Silicon: 0.10-0.30%

• Phosphorus ≤ 0.040%

• Sulphur ≤ 0.040%

• Tensile strength: 600-750 N/mm2

• Zinc Coating Mass: Zinc mass ≥ 60 g/m2

• Typical Applications: building rural fences on flat or regular terrain

• Packaging Options: Plastic film inside and woven cloth outside Or wrapped with plastic and PVC strip,suitable for break bulk shipment

• Standard Compliance: Manufactured according to UNE 36089 for flat wire applications

Flat Wire for Poultry Feeding Auger Springs - Grade 65Mn Supply

Flat wire designed specifically for poultry feeding auger springs, suitable for farm machinery and equipment.

• Material Grade: High-Quality 65Mn Steel

• Wire Dimensions: 8x4 mm, 10x5 mm, 12x5 mm, 14x6 mm, 16.5x5.5 mm

• Wire Sizes: All available sizes supplied in millimeters, covering multiple poultry feeding machinery needs.

• Packaging : Coils and Cut Pieces
  

• Applications: Poultry Feeding Systems

• Surface Finish: Smooth and Consistent

• Compliance:Manufactured under strict quality control for mechanical properties and dimensional accuracy.

1010 CR Round Edge Steel Flat Wire for Industrial Flat Wire

• Material Grade: 1010 Cold Rolled (CR) Steel

• Wire Type: Flat Wire with Rounded Edges

• Product Code: MR# 6413005

• Width: 1.5 inches (38.1 mm)

• Thickness: 0.125 inches (3.18 mm)

• Surface Finish: Smooth Cold-Rolled, consistent dimensions

• Standard Dimensions: 0.125" x 1.5" (3.18 mm x 38.1 mm)

• Custom Sizes: Available on request for specialized applications

• Applications: Springs, clips, structural components, assembly lines, fabrication

• Packaging: Coils or cut-to-length pieces for easy handling

• Tensile Strength: Standard 1010 CR steel mechanical properties

• Compliance: Industrial quality control for edge rounding, dimension tolerance, steel consistency